Core Product
Potential Industries: E-mobility, Renewable energy storage
Good for: Wide temperature range, Long cycle life > 10,000 cycles, Fast charging (<10 minutes), High safety
OEM Product #1
Potential Industries: Consumer Electronics
Good for: High energy capacity, High cathode voltage, Low cost
Potential Industries: E-mobility, Renewable energy storage
Great for: Good cycle life, Safe, Matured technology
Battery Packs, available in various sizes, consist of many battery cells bonded together to achieve the desired capacity. Available in various sizes depending on end user applications, such as e-Bikes, Solar Energy Storage, Wireless Appliances, etc.
Collaboration with A*STAR, Institute of Materials Research and Engineering (IMRE) and their team of highly qualified scientist aiming to develop next generation of high performance 18650 LTO/NCM battery cells.
Batteries developed and produced by LiRON focuses on long cycle life, fast charging, high discharge current and good safety performance that also works well at low temperature and with high temperature tolerance.
Torch Light, vacuum cleaner, power drill, power banks, Smart Devices, Cameras, etc
e-bike, e-scooter, e-rickshaw, drones, wheelchair, hoverboard, cars, e-surfboard, etc
Solar Energy storage, Wind Power storage, UPS, off-grid applications, solar lightings, etc
Hun Keng has accumulated over 30 years of industrial experience in product development and manufacturing. He was involved in founding multiple electronics, data storage media and renewable energy industry manufacturing companies, including listing in stock exchange. Hun Keng continues to be involved in technology start-up projects, and plays mentor and corporate advisory role.
Hak Wei obtained a Bachelor Degree in Business from the University of Queensland. Hak Wei has been in the clean-tech and renewable energy industry for more than 10 years, focusing on energy efficiency, sustainability and off-grid applications like solar power and wind energy. Hak Wei has interest in the areas of smart manufacturing and blockchain technology and is aiming to develop LiRON into an Industry 4.0 manufacturer.
Mr Kim will take the role of Chief Technology Officer upon joining LiRON LIB Power Pte Ltd. Mr Kim has more than 25 years of experience in engineering and manufacturing in chemical process and lithium ion battery set up. He holds a Bachelor and Master Degree in Chemistry from Yonsei University, South Korea. For the last 5 years, he was based in China playing major roles from setting up and construction, equipment installation to commercial production operations in EV battery cell and pack production plants. Prior to his engagement in China project, Mr Kim started his career in a Korean multinational company group. He was involved in chemical materials for display in monitor production. He was assigned to work in Europe for 5 years as Senior Engineer in the development of silicon metal process used in Colour Display Production. Subsequently he returned to Korea and worked at the lithium battery division as Principal Engineer and was responsible for its automotive battery production. Mr Kim has vast knowledge and experience in the entire battery manufacturing process in pouch and prismatic cell for EVs and ESS.
Sir Ling joined the company as Chief Financial Officer in August 1, 2019. She has served as Vice President of Finance at Certis CISCO Security Pte Ltd for more than 10 years and was responsible for the accounting, finance, treasury and tax functions for various subsidiaries in the group. Sir Ling has accumulated over 20 years of working experience in the area of auditing, accounting, corporate finance and taxation. She has worked in various companies including public accounting firms and company listed on SGX-ST such as Eastgate Technology Limited. She is familiar with regulatory rules and financial structure for public companies in Singapore. Sir Ling holds a Bachelor Degree in Accountancy from Nanyang Technological University and is a Member of the Institute of Certified Public Accountants of Singapore.
Kyaw Thein graduated with a Bachelor of Engineering (Chemical) at Rangoon Institute of Technology, Myanmar, Graduate Diploma in Pulp & Paper Technology at Trondheim University, Norway and a Master of Technology in Knowledge Engineering, National University of Singapore, Singapore. Before joining LiRON, Kyaw Thein has years of experience in these industries- Research and Development of raw materials for Pulp & Paper industries with research lab using TAPPI standard, Installation and Test run of Pulp and Paper pilot plant (UNIDO project) at Central Research Organization, Ministry of Industry 2, Myanmar. Manufacturing of uPVC pipe & fitting and solvent cement. Implementing ISO management system, quality control of products to comply with Singapore standards, production and material planning at Splendour Corporation Pte Ltd, Singapore.
Alvin received his B.Sc. (2017) degree from Department of Chemical Engineering, Institut Teknologi Bandung, Indonesia. In 2019, he graduated with a M.Sc. from the SKKU Advanced Institute of Nano Technology (SAINT), Sungkyunkwan University, South Korea. During his graduate program, he was involved in collaboration with Korea Institute of Science and Technology (KIST) and international battery conference. After receiving his education, he joined LiRON as a battery research engineer and is responsible for managing the activities at LiRON's Research and Innovation Center. His main interest is in the development and design of high-performance Li-ion batteries by selection and modification of cathode and anode. He has been involved in identifying problems related to the manufacturing and research of Li-ion batteries and able to improve the efficiency and performance of Li-ion batteries.
Dr. Wirachai Roynarin (Dr Roy) is the Assistant Professor in the Department of Mechanical Engineering, Rajamangala University of Technology Thanyaburi (RMUTT). He is the Director of Research Centre of Renewable Energy Division and the Assistance Dean in Engineering Faculty. Dr Roy is also the current President of Thailand Renewable Energy for Community Associations (TRECA) Dr Roy’s field of expertise is in Renewable energy research on Wave Energy and Wind Turbine system technologies. He leads the design and technology development team in achieving low wind speed wind turbine. These wind turbines were installed at various locations across Thailand and overseas. Dr. Roy received the Best Academic Award in Best Research in Field in Renewable Energy from the Ministry of Science and Technology in 2007, and the Gold Medal for best lecturer from the Thai Government in 2008, and Best Award in Wind Energy of WAESE 2009. Dr Roy obtained his PhD in Mechanical Engineering from Northumbria University, Newcastle, England. He is the founder of FT Energy Co Thailand in the product development and marketing of wind energy system. In 2019 he was appointed to design and develop the King’s Wind Farm Project in Thailand with built-in battery energy storage system (ESS).
Dr. Jing Yuan Liu is the General Manager Operations & Marketing with Altech Chemicals Ltd based in Perth Australia since 2015 for its high purity alumina (HPA) project. HPA is a critical material in lithium battery separator coating for battery safety and life performances. Dr Liu has over 20 years’ experience in project management, process and equipment design for minerals processing and in the chemicals, non-ferrous metals, iron & steel and energy industries, both in Australian and internationally. He was awarded a PhD in chemical engineering from the University of Newcastle, Australia. He has worked in senior chemical engineering roles with leading companies such as Hatch Engineering and Metso Minerals in Australia. Dr Liu was previously General Manager – Development and Technologies with Galaxy Resources Limited, a high purity lithium carbonate producer. Dr Liu’s extensive chemicals and processing experience, including plant construction, commissioning and the manufacture of high purity chemicals.
Dr. Chiam Sing Yang is a senior scientist at the Institute of Materials Research and Engineering (IMRE). He received his B. Eng in Electrical and Computer Engineering from National University of Singapore, graduating with a Class I degree, before obtaining his Ph. D in Physics from Imperial College London in 2008. He is currently heading the electronic materials department in IMRE overseeing cutting edge semiconductor and battery materials research. He also holds concurrent responsibilities in managing research programs and contributes regularly as a review panelist. Previously, Dr. Chiam was also an Adjunct Assistant Professor at Nanyang Technological University from 2011-2019, where he taught a course in Semiconductor Device and Physics for 4 years. He has supervised more than 30 students in final year and doctorate projects and has published more than 70 research papers with >2300 citations in the areas of energy, nanomaterials and semiconductor research. He has more than 15 years of experience in interface physics and electrochemistry of electronic materials and a keen interest in pushing the development and translation of technologies.
Eduardo is a native from Argentina who lived 10 years in Brazil and works in projects in the United States since 2012. Over the past seventeen years Eduardo worked with International business, integration of complex value chains, product development, import export, supply chain operations and business consulting in Brazil, Argentina and US. In the last 4 years developed an impressive career in ArqBravo Grooup, a sustainable mobility innovation company, leading its success in the US, integrating technology companies from all around the world to work over solutions on Sustainable Transportation, Renewable Energy sources application and communications. As company's CEO is in charge of establishing operations, strategic alliances, articulating efforts with private and governmental institutions to create solutions to complex problems.
I have a deep expertise in mathematical modelling and numerical simulations applied to the energy sector. I managed and worked on different projects, starting from oil & gas to renewables, specializing in photovoltaics. Able to switch from the academic to the industrial approach, I am interested in every technical and financial aspect of the energy sector. In the last years, I am focusing on blockchain applications to the energy industry, testing an innovative approach to energy communities with a new market mechanism.
Head Office & R&D Lab:
1 Tampines North Drive 1, T-Space, #03-16, Singapore 528559
t: +65 66341055
e: enquiry@liron-lib.com